Sale!

Ultimate frame press wall mount pull up bar

(4 customer reviews)

$82.00$84.56

  • make sure this fits with the aid of coming into your version range.
  • new unique version: gusseted risers deeply assist the bar for the ultimate in stability and electricity. Low profile hardware works without problems with bar add-ons (offered separately). New boxed wall plates boom clearance and set a bold appearance to your wall.
  • better workout routines: industry leading 14. 5 – 21 inches of wall clearance presents most variety of movement. High density foam grips reduce strain for longer workouts. Padded grip positions at 10, sixteen, 24, and 36 inches lets you goal the effects you want.
  • rigid mount: the wall mount pull up bar special version is rated for 350 lbs to assist your most strenuous workouts. A inflexible bar frees you to cognizance on form and repetition so you can get more from your workout time.
  • easy installation: the wall mount pull up bar is precision engineered for clean domestic set up on 16 inch on-middle wall studs. Complete hardware, mounting template, instructions and usa tech support are blanketed.
  • ideal anchor for non-compulsory accessories: construct a complete body gym with remaining body press ab straps and gymnastic rings for fairly metabolic full body exercises and assisted pull up variations. (accessories sold separately)
  • sport kind: exercising & fitness
Clear
SKU: C1988AOKWE755 Category:

from the producer

unique version with welded inset bar gussets and box segment wall plates – our most powerful 16″ on-center bar.

a body in motion imparts kinetic loads on the bar nicely beyond your bodyweight. Welded-in gussets fit the profile of the bar to distribute the ones forces over a extra surface vicinity. The gussets better aid the bar at the same time as improving the steadiness of the entire body for high energy, distraction-loose workouts.

  • consists of u. S. A. Tech aid
  • whole assembly commands and mounting hardware are blanketed
  • 10 year strong: the wall mount pull up bar is backed through remaining body press in opposition to producer’s defects for 10 years
  • wall mount pull up bar unique edition

    introducing the new wall mount pull up bar special version by remaining body press. The special edition builds on the superb electricity and wall clearance of the authentic wall mount pull up bar with inset bar gussets and field segment wall plates. The inset gussets make the bar a coupled a part of the body to boom energy and pressure. The box segment wall plates boom wall clearance and power at the same time as including an architectural design detail for your gymnasium.

  • new special version is our strongest 16 inch on-middle bar.
  • inset riser gussets increases the bar ability and frame stress.
  • performance engineered field phase risers increase clearance, guide 400lbs and appearance putting on your wall.
  • 14. 5 inches of wall clearance for remarkable variety of movement
  • non-interference hardware is right for anchoring add-ons like ab straps and gymnastic rings with out chafing. (offered one by one)
  • effects pile on speedy with a rigid bar that keeps your focus on form and repetition
  • unique edition superior functions for first rate overall performance

    bar gussets efficiently distribute your workout forces over a bigger section of the bar. Better support makes the bar stronger and mounting and assembly couldn’t be easier.

    field segment wall plates boom electricity and wall clearance at the same time as giving your fitness center an distinctive architectural element.

    with the pull up bar permit into the risers, the bar becomes a structural a part of the body and forces to risers to an excellent ninety tiers with the bar. The result is an ultra rigid and sturdy frame for distraction loose, excessive depth workout routines.

    approximately ultimate frame press

    our passion is providing health gadget that helps you to get the most out of your workouts each day. By means of producing high first-class low cost products that look extremely good and function past expectation we are able to create a profitable area on your existence for exercising and help you reach new tiers of fitness, well being and private overall performance.

    we price your health and are proud to serve your gym wishes. Remaining frame press health gear is sponsored with united states of america tech support.

    style_name

    Original, Special Edition

    4 reviews for Ultimate frame press wall mount pull up bar

    1. Jim

      Worked great until it gave out on me in the middle of the workout! Is there a warranty!? Read more

    2. D. Matheny

      Your browser does not support HTML5 video. In this video I go over the pieces that come in the box as well as walking through the entire install process. In order to keep the video under the 10 minute limit I had to speed some parts up, but not much. The entire install process took 15 minutes – with an additional 10 minutes for getting out tools and putting them back away. If you don’t watch the video, let me stress that the INSTRUCTIONS ARE WRONG when they say to pre-drill four 7/16″ holes for the lag bolts. You should pre-drill 7/32″ holes instead. That’s a big difference! As far as the bar itself goes, it has turned out to be very solid. I’m 6’7″ and 220lbs – and the bar holds my weight without any problems at all. One reason I went with the wall-mounted bar instead of one that just hangs in a doorway is because of my height, but I also think this looks better than the door-frame versions and you don’t have to worry about damage to the molding or having to store it. I am completely convinced that this bar will last for years. When installed, the bar is 12″ from the wall and is a total of 38″ wide. The front-facing handles stick out about 19.5″ (to the very tips). The center-line of the two supports are exactly 16″ apart – which is great for mounting to typically spaced wall studs (although, you should check where you want to install the bar before ordering). Although I’m very happy with the Ultimate Body Press Pull-Up Bar, I am docking a star for a couple of reasons: 1) The rubber grip on both front-facing handles is messed up due to the way it was packaged. I showed this in the video as well. 2) Although this was easy to install, the instructions are a joke. There are multiple errors that are fairly serious if you were to follow the directions exactly without thinking it through. In some ways, I probably should have docked 2 stars for this since most of us trust the directions to be right and assume they will start making sense on a future step… 3) I should have mentioned it in the video, but I did end up using different lag bolts than the ones that were provided. (You can see the ones I used were silver and the provided bolts were black.) My main concern was ripping the heads off the bolts with my impact driver… Overall, if you are looking for a solid wall-mounted pull-up bar, this is an excellent choice. With just a couple of tools and a few minutes you can have a rock solid bar that is out of the way and should last for years. Now I just need to start improving my pull-up strength! *** UPDATE 6/30/11 *** I’ve been using this bar for a few weeks now and it is working great. One thing I’ve found is that it actually works better for me if I keep my back to the wall and do a pullup ‘behind’ the bar. (Hopefully that makes sense.) If I do pullups while facing the wall, my body actually ends up being a little too far away from the bar because of the way my feet go forward; but, when my back is to the wall, I get that satisfying feeling of my chin going over the bar. Another thing I did at first was to pick up some Iron Woody assisted-pullup bands to help increase my strength. Those bands work great for me and I can tell a huge difference already. I can now do 4 whole pull-ups without the bands! (Don’t laugh…) Read more

    3. Brandon

      Hey all. Writing this as a warning to anyone wanting to install this into a horizontal header instead of vertical studs. I put this above a 4′ wide closet door frame that is also a load bearing wall. There is a 2×12 header installed there, and I hit it with all 4 lag bolts. Plenty strong, I thought! Well…it’s holding. Barely. The wall now flexes where the top bolts pull down on it. I did two pull-ups and stopped because it feels like I may end up twisting the header right out of the wall! So, take my advice and put this thing into some upright studs (or if you do try it in a header, be prepared to move it elsewhere and patch some big holes.) Read more

    4. J7891R

      Where to start. There isn’t too much to say about the product itself. I love the bar. Took me sometime to get it mounted correctly but that is no fault to the product. The mounting bars are spaced 16″ on center. My exterior wall studs are 18″. So do yourself a favor and measure a few times, find out where your studs are, etc. I wound up cutting the drywall out (the width of a stud to minimize patch work). Finding the studs that I had. Turns out they were basically these 2×2 finishing studs fastened to a concrete wall. From there, I cut a 2×4 in to (4) 12″ pieces. About 4″ longer than the support bars. I fastened the first set of studs to the existing studs with 2-1/2″ lag bolts counter sunk. From there I mounted the second set of studs with 4″ lags bolts counter sunk through the first set into the existing stud. Once they were up I mounted the bar. I can tell you, it probably was a bit of overkill. Though, I spackled around the studs, wood puttied the cracks between the studs, and then painted everything. Going on about a month of use, nothing has moved. My only possibly complaint in the future might be with the grips wearing but at this point, I haven’t had any issues. The products is sturdy, built well in my opinion and includes the lags bolts necessary to mount it. I would recommend. Read more

    Add a review

    Your email address will not be published. Required fields are marked *

    Shopping Cart