Sale!

Wall mount dip station with vertical knee raise

(8 customer reviews)

$173.88 $165.53

  • make sure this suits by coming into your model range.
  • compound body weight physical activities: the dip and vertical knee boost station brings three top exercises to your gym for remarkable complete body exercises. Dips and assisted pull usafor your shoulders, again, chest and center, and knee increases in your decrease abdominals.
  • smooth installation: set up is straightforward for houses with 16inch on-middle studs. Health club satisfactory completely braced all steel frame supports up to 350lbs. Best for domestic gyms of any length with mounting hardware and usa tech aid blanketed.
  • quick metabolic blast: your metabolism activates while you work your primary muscle corporations in compound movements. A short session with dips, knee increases and assisted pull u. S. A. Switches your metabolism on for all day fat burning and herbal power.
  • the supported abs exercise: replace sit united stateswith knee raises – the absolutely supported way to goal the lower abdominals. Angled handles, contoured lumbar support pad and forearm pads preserve your focus on shape for the quickest outcomes on how you look and circulate.
  • new white powder coat frame: the new vertical knee raise station compliments the look of your gym with a high comparison white powder coat body over top rate satisfactory black vinyl padding and hardware. Wall mount preserves your open space for floor exercises.
Clear
SKU: C19Z078HX0523 Category:

from the manufacturer

three of the most effective compound body weight exercises

your metabolism kicks into overdrive whilst compound body weight exercises have interaction your main muscle systems on your higher and decrease body and middle – inspite of very brief workouts. The dip and vertical knee enhance station via last body press gives you open access to dips, assisted pull ups, and knee increases to construct functional muscle rapid and places you in general manipulate of your metabolism. If you are extreme approximately effects and want gym nice workouts at domestic, bolt the dsvkr through ultimate body press to your wall.

replace take a seat usawith completely supported vertical knee raises

when you have hit a plateau with your decrease stomach outcomes, you’ll be held lower back by the limitations of the sit-up role. With a contoured lumbar pad, thick forearm pads, and canted handles the dsvkr aligns your posture and frees your hips and legs for complete range of movement knee increases. Taking needless strain out of your decrease stomach workouts approach you can dig deeper into each set with extra concentration and staying power. The dsvkr brings new results to your lower abdominals and you are going to love the way you appearance and circulate.

installs effortlessly with preferred 16 inch ‘on-middle’ framing

the wall mount dip and vertical knee enhance station is designed and supported inside the usa. Final body press is a north carolina business enterprise dedicated on your quality exercises. We build the equipment we need to use and assume you will like the outcomes. Your dsvkr comes complete with meeting and set up hardware, entire commands and united states tech assist.

about closing body press

our passion is imparting fitness equipment that helps you to get the maximum from your workouts every day. By using generating high first-rate low-priced products that appearance wonderful and feature beyond expectation we are able to create a rewarding space in your existence for exercise and assist you attain new stages of fitness, nicely being and personal overall performance.

we value your fitness and are proud to serve your health club wishes. Final body press health tools is backed with usa tech assist.

color_name

White

8 reviews for Wall mount dip station with vertical knee raise

  1. Brian

    I’ve checked out a few other ab/dip stations online and took a gamble on this one…and I’m glad I did. I preferred a wall-mounted product to save floor space in my basement home gym. I mounted it into a poured concrete wall using some 3/8 x 4” lags with shields. I broke one of the included lags so I purchased some higher grade ones for this project. I’m confident that the included lag bolts would be sufficient for mounting into wood studs, but I went with some stronger ones for concrete mounting. The whole thing feels sturdy and well-built. After trying out a few leg raises and dips, I tested it by doing some weighted dips with a 45 lb bumper plate (see attached pics). I’m 5’10”, 205 lbs and I feel confident that this thing could easily hold 300 lbs. I’m very satisfied so far, and my wife is too as she uses it for ab work. Strongly recommended. Read more

  2. Lance P. Rhodes

    I was weary about purchasing this product, as many other customers complained that the parts did not assemble correctly. I had it 90% installed when I discovered that the vertical handle grip was not machined correctly and could not thread the bolt. The Amazon.com seller was unable to send me a replacement part, but did (satisfactorily) provide a partial refund. I contacted the manufacturer directly, and they were more than happy to send a replacement part free of charge. It is now installed and fully functional. I am not marking the product down due to customer service issues. Both parties were great and handled my problem appropriately. However, even though the product was marked “new” and came fully packaged, it has several scratches and gashes in the paint, most likely due to machining. The paint job looks like it was dropped and run along a cement floor. Also, the padding is very cheap. It looks like it was stapled on in a sweat shop and will most likely tear off after repeated use. But it seems to work great for my simple workout. The wall studs and drywall seem to be holding, even for the extended vertical pushups. (For references, I weigh about 140 pounds.) Read more

  3. Joe

    Comfortable size and decent padding. It came in the box with a few scratches. Was easy to assemble. Does a great job of providing a good dip station without using floor space. Be aware however, I found that mounting this to a finished wall (Sheetrock) it needed to be mounted to a more solid support. I used 2×4’s and went and got longer lag screws (8). This made it as solid as a rock. At 195 pounds, and 215 pounds in full uniform, I was doing dips without an issue on this. Read more

  4. Micah B.

    I read some of the reviews left by others before purchasing this dip station, so I was aware that it might have some issues straight out of the box. Unfortunately this was the case with the one I ended up getting. The support bracket (The part that attaches to the wall separately from the back/main apparatus and supports the bottom of the arm rests; see photo) did not fit the arm rests, making mounting impossible without me bending the part by are least an inch. I’ve contacted customer support and will update once I get a response and am actually able to use the item. Update: upon emailing customer support they requested I send my address and then sent the part without question or verification, with it promptly arriving three days later. The new part fits well and I’ve since assembled and used the station, happy to say it feels very sturdy and comfortable. Padding is very firm (But still comfortable) and seems to hold up well after extensive use. Read more

  5. Jeff Kackley

    I don’t have the room for gym equipment in my house so I needed something I could put in my unfinished storage room that takes minimal space. The instructions and hardware it came with were to mount it on a framed wall but it worked out great on a concrete wall with a bit of work. I ended up buying two 3/8″x5″ wedge anchors for the top bar. Had to drill the holes on the frame to be slightly larger than the original 5/16″ but I couldn’t find wedge anchors in 5/16″ and wanted the extra strength that wedge anchors provide. Then I used two tapcon 3/16″x4″ fasteners for the support bracket with a stack of washer between the bracket and wall to make up for uneven surface. Go slow with the tapcon and don’t use a ratchet or you’ll snap the head off the screw like I did. After everything was said and done it’s incredibly sturdy, doesn’t move or creak at all and feels solid. I’m actually even missing a screw on the support bracket since I snapped the head off and can’t get it out, but it’s still extremely solid. The unit is well built, the pads are made well and it feels right to use. It’s great to not take up floor space. Read more

  6. Amazon Customer

    I’ve set up my home gym in my garage. Apart from it having to be functional, it also needed to use as little space as possible (I like to park my cars in there). This dip station fit the bill quite nicely as it is very compact. It is very sturdy when mounted properly and seems to be well built. My only gripe is that I wish the handles were made of a wider diameter tubing. Depending on how big your hands are and how much you weigh, you may feel that the handles can dig in to your palms. Overall though, I would definitely recommend this product. Read more

  7. Happy mommy

    I went way overboard installing it to my wall in my garage, but it is very solid and I can get dips and leg pull ups all day. plus my kids now have something to hang on. The instructions were a little confusing because they mis-labeled a bolt length for the pads VS the arm bracket to the support frame, but once I figured that out it was ok. Read more

  8. jinmandroid

    This dip station is completely rock solid, no sway or movement of any kind. The wall mounting certainly lends to it’s sturdiness, as well as utilitarian good looks. Leg raise configuration feels perfect, and hand position for dips is spot on. Minor gripes; the slightly small dip grip handles cut into your hands a bit, and the installation instructions weren’t the best. Both easily overcome. Otherwise, this is my perfect dip station. Read more

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart